六台宝典开奖软件

Wuhan Xin'Aolong Fire Equipment Co., LTD Wuhan Xin'Aolong Fire Equipment Co., LTD
15171480959 027-85482651 15171480959
Fire equipment manufacturers
Foam generator
Foam generator
    Official 六台宝典开奖软件:
    • Three points to note for balanced foam fire extinguishing devices
      As a safe and efficient balanced foam fire extinguishing device in the fire protection field, whenever a disaster occurs, firefighters can always be seen carrying the critically acclaimed balanced foam fire extinguishing device and rushing to the front line of rescue work to control the scale of the fire. live. According to the working characteristics of the device, the following points need to be noted for the balanced foam fire extinguishing device. I. Sufficient foam liquid reserves Fires may occur suddenly at any time and anywhere. In order to resist the disaster in time, it is necessary to ensure that the balanced foam fire extinguishing device is equipped with sufficient foam liquid when extinguishing the fire. Therefore, during the standby and standby periods of the equipment, the foam liquid in the diversified balanced foam fire extinguishing device storage tanks must be sufficient, and in order to shorten the foam liquid from the foam liquid storage tank to the mixer during the use of fire suppression, Liquid supply time, the foam foam in the pipeline of the balanced foam fire extinguishing device must also be sufficient. Second, foam liquid quality assurance. If it is found that the foam liquid deteriorates due to long storage time, it needs to be replaced immediately. It should also be noted that when the foam liquid is first filled, the tank of the balanced foam fire extinguishing device is flushed and the water is discharged. In order to work in a disaster situation, the delay can be controlled in time. The type of foam liquid in a stable and safe balanced foam fire extinguishing device must meet the requirements of the device, and no impurities are allowed to be mixed. 3. Reasonable storage environment In order to ensure that the balanced foam fire extinguishing device can be used normally at any time and place, it must be placed in an environmental space with reasonable temperature during normal storage. The foam liquid pump must be operated strictly in accordance with the instructions when using it, pay attention to the normal range of pressure, and pay attention not to completely close the inlet and outlet valves and leave a certain gap. It should also be cleaned in time after use to prevent the balanced foam fire extinguishing device from being corroded by the foam liquid. The brief introduction of the balanced foam fire extinguishing device is as described above. When purchasing, pay attention to find reliable channels for the wholesale and retail of balanced foam fire extinguishing device manufacturers. Only the management or technical omission of certain details may cause great damage to the ecological environment. Bring irreparable harm and loss.
      - 06 - 20 2019-06-20
    Custom products Custom services for you

    While our imagination of agriculture was still in the mud on the trouser legs, the mobile cloud machine had started a show on the field. Wholeheartedly customize a personal mechanical helper for you.

    • TH915-tractors assistant
    • Holographic video soil acquisition
    • Multifunctional robot arm
    Receive 六台宝典开奖软件 and notification of initiatives
    / Products Products
        • 高背压泡沫产生器
          2017 - 12 - 02 Release Date: 2017-12-02
          I. Introduction The submerged spray foam fire extinguishing system (hereinafter referred to as the submerged foam system) is a fire extinguishing system in which foam is injected under the surface of the burning liquid, and the foam rises to the liquid surface through the oil layer and spreads out to form a foam layer. Compared with the liquid jet foam fire extinguishing system, it has the following characteristics: (1) The foam inlet is installed in the lower part of the oil tank, and the bottom of the oil tank explosion is generally not easily damaged, thereby improving the safety of the submerged foam system. At the same time, the effective reserve of the oil tank is also increased. (2) When extinguishing fire, the foam passes through the liquid to reach the burning liquid surface, but does not pass through the high-temperature flame, which reduces the loss of foam and improves the fire extinguishing effect. (3) When the foam floats from the lower part of the oil tank to the burning liquid level, the convection between the cold oil on the bottom and the hot oil on the top of the tank produces a cooling effect, which is beneficial to fire extinguishing. (4) It is possible to use the ready-made oil inlet pipeline of the oil tank as the foam pipeline without setting a dedicated foam pipeline, thereby saving investment. The submerged spray foam generator is also called a high back pressure foam generator (hereinafter referred to as a submerged generator), and it is the key fire-fighting equipment for generating and ejecting low expansion foam in a submerged foam system. 2. Structural Features 1. The submerged generator is developed according to the fluoroprotein foam liquid. 2. There are six types of submerged generators, PCY450G, PCY900G, PCY1350G, and PCY1800G. They are always fixedly installed in the submerged foam system, so they are called fixed submerged generators, PCY450, and PCY900. Only when it is connected to the submerged foam system, it is called a mobile submerged generator. 3. The submerged generator is composed of a body, a mixer, a diffuser, a pipe interface, a pressure gauge and the like. The diffusion tube of the fixed submerged generator is integrated with the mixing tube, and the two ends are flanges. Mobile submerged generator mixing ...
        • 移动式高倍数泡沫产生器
          2017 - 11 - 11 Release Date: 2017-11-11
          1. Brief introduction: PF4 mobile hydraulic high multiple foam generator is composed of 400L mobile foam liquid tank, proportional mixer, high multiple generator and so on. The pressure water supplied by the water pump passes through the proportional mixer to form a mixed liquid at a ratio of 3% or 6%, and is sent to the generator under pressure. When the pressure mixed liquid passes through the nozzle and is impacted, the fan is quickly rotated to generate air flow and blow the mixed liquid. The foam group is generated to cover the fire point, cool down, and extinguish the oxygen. It can also play a role in protecting the safety of on-site personnel. It can also unscrew the hose connection buckle connected to the high-power generator and connect the foam gun for distance fire suppression. 2. Characteristics: (1). This type of high hydraulic foam generator is small in size, light in weight and large in foaming capacity. (2). This type of generator can be installed according to the installation environment, or it can be moved to any area to directly extinguish the protective foam. (3). People who can't escape in time in the fire extinguishing zone can be covered in the foam group, just cover the nose with their hands to let the foam burst at the finger joints, and the oxygen in it is enough for breathing, because the foam is transparent Doors and windows can be seen in the foam group, and slowly walk out to leave the fire zone. (4). All items and electrical equipment in the protected area will be without loss. Because the water consumption of the foam group is very small, the foam is covered fire extinguishing. After the fire extinguishing, it can be restored by blowing it off with a fan. 3. Applicable places and scope: PF4 hydraulic high multiple foam generator is suitable for warehouses, garages, library tubes, liquefied gas stations, archives, chemical workshops, passenger and freight ships, shopping malls, restaurants, computer microcomputer rooms, large coal yards, Large garbage dump. 4. Use method: PF4 hydraulic high multiple foam generator, in addition to being a full-flooded fixed fire extinguisher in a large area and limited space, it can also be used for ...
        • 固定式高倍数泡沫产生器
          2017 - 11 - 11 Release Date: 2017-11-11
          1. Brief introduction: PF4 fixed hydraulic high multiple foam generator is composed of fixed foam liquid tank, proportional mixer, high multiple generator and so on. The pressure water supplied by the water pump passes through the proportional mixer to form a mixed liquid at a ratio of 3% or 6%, and is sent to the generator under pressure. When the pressure mixed liquid passes through the nozzle and is impacted, the fan is quickly rotated to generate air flow and blow the mixed liquid. The foam group is generated to cover the fire point, reduce the temperature, extinguish the oxygen and extinguish the fire, and also play a role in protecting the safety of the personnel on site. 2. Characteristics: (1). This type of high hydraulic foam generator is small in size, light in weight and large in foaming capacity. (2). This type of generator can be installed according to the installation environment, or it can be moved to any area to directly extinguish the protective foam. (3). People who can't escape in time in the fire extinguishing zone can be covered in the foam group, just cover the nose with their hands to let the foam burst at the finger joints, and the oxygen in it is enough for breathing, because the foam is transparent Doors and windows can be seen in the foam group, and slowly walk out to leave the fire zone. (4). All items and electrical equipment in the protected area will be without loss. Because the water consumption of the foam group is very small, the foam is covered fire extinguishing. After the fire extinguishing, it can be restored by blowing it off with a fan. 3. Applicable places and scope: PF4 hydraulic high multiple foam generator is suitable for warehouses, garages, library tubes, liquefied gas stations, archives, chemical workshops, passenger and freight ships, shopping malls, restaurants, computer microcomputer rooms, large coal yards, Large garbage dump. 4. Usage: PF4 hydraulic high multiple foam generator, in addition to being a full-flooded fixed fire extinguisher in a large area and limited space, it can also be used in the following places: A. Vehicle-mounted foam ...
        • 隔爆高倍数泡沫产生器
          2017 - 11 - 11 Release Date: 2017-11-11
          1. Product Features, Uses and Scope of Application 1.1 This device can produce high expansion foam (high expansion foam—foam expansion 500 times to 800 times), fill the fire extinguishing area quickly, and eliminate the smoldering fire of solid materials, and also exclude indoor And gas and toxic gases in limited space; 1.2 high-foam foam has good "permeability", it is also suitable for indoor fires in small terrain where it is difficult to approach or find fires, and can be rescued at a safe location from a long distance; 1.3 The high expansion foam produced by the high expansion foam fire extinguishing device is full of limited space, fast and powerful roadway, and can shorten the fire extinguishing time. It is another new breakthrough of foam fire extinguishing technology in the field of rescue equipment; 1.4 It is mainly used to extinguish roadways and concrete. Large areas of open fires in limited spaces such as rooms, underground buildings, ships, hangars, warehouses, oil depots, shopping malls, etc. Its targets include fires of combustible materials such as oil, wood, coal, rubber and various fabrics. Can also be widely used for ground and water fire services.
        • 中倍数泡沫产生器
          2017 - 11 - 11 Release Date: 2017-11-11
          The PZ series medium multiple foam generator is a fixed horizontal liquid air bubble generating and spraying device. It is fixedly installed on the side of a combustible and flammable liquid storage tank. It sprays 30 to 40 times the medium multiple air foam expanding into the tank to extinguish the fire. . It is matched with fire pump unit, air foam proportion mixer or foam fire truck and piping system to form a fixed or semi-fixed medium multiple foam fire extinguishing system. The medium multiple foam generator has strong adaptability to foam liquid, and can be used in combination with high, medium and low multiple foam liquids. The foam multiple is in the range of 20-40 times, and the fire extinguishing ability is strong and the effect is good. In Daqing Oilfield, two oil tanks with a height of 22m and a diameter of 80m are equipped with eight generators of this type, and the new tank of the petrochemical plant at the foam closing time of 2min is also equipped with this type of generator. The multiple foam generator uses a high multiple foam extinguishing agent, which has strong fluidity The foam is non-toxic and non-polluting. In addition to diesel and gasoline, it can also effectively extinguish alcohol, ether, and benzene water-soluble liquids. After the fire is extinguished, the raw materials are not affected by damage, and medium-fold foaming agents can also be used. This type of generator can still foam normally when the top of the tank is torn, and it is safe and reliable.
        • 中倍数泡沫枪
          2017 - 11 - 11 Release Date: 2017-11-11
          I. Product introduction Executive standard: GB25202-2010 air foam gun is a relatively light fire-fighting equipment that can generate and spray air foam to extinguish medium oil fires. The foam gun is composed of a nozzle, a hand wheel, a gun barrel, a gun head, and an internal button interface. The nozzle is used to control the flow and generate negative pressure, the hand wheel is used to control the spray direction of the foam gun, the barrel is used to adjust the dynamic balance of the air foam puffing, and the internal buckle interface is used to connect with the fire hose. Working principle: The inlet end of the air foam gun is connected to the fire hose. When the pressure of the water flow reaches a certain value, a negative pressure is formed again due to the rate of fire, and a large amount of air is mixed with the mixed liquid. When the air foam passes through the barrel, the air foam mixes and expands. When the foam reaches equilibrium, it is ejected from the barrel.
        • 抗溶性氟蛋白泡沫灭火剂
          2018 - 04 - 24 Release Date: 2018-04-24
          3% FP / AR foam fire extinguishing agent (former YEKF-3 fluoroprotein-resistant foam extinguishing agent), the fire extinguishing agent consists of amino acid type fluorosurfactant, liquid resistance additive, fluorocarbon surfactant, hydrolyzed protein, gelatinized Prepared by raw materials such as preventive agents, in addition to the characteristics of fluoroprotein, a polymer film can be formed on the surface of water-soluble substances such as alcohols. The dual role of foam and film can quickly and effectively block the air. Suffocate the fire. It is mainly used to extinguish fires of water-soluble substances such as alcohol, ether, aldehyde, and ketone; it can also extinguish fires of water-insoluble substances such as petroleum and petroleum products. Widely used in large-scale chemical enterprises, oil fields, oil depots, hangars and other fixed fire extinguishing devices, can also be used for mobile fire extinguishing equipment such as fire trucks. The volume mixing ratio with water is 3:97 (3% FP / AR), and the shelf life is 2 years. 6% FP / AR foam fire extinguishing agent (former YEKF-6 fluoroprotein-resistant foam fire extinguishing agent), the fire extinguishing agent consists of amino acid type fluorosurfactant, liquid resistance additive, fluorocarbon surfactant, hydrolyzed protein, gelatinized Prepared by raw materials such as preventive agents, in addition to the characteristics of fluoroprotein, a polymer film can be formed on the surface of water-soluble substances such as alcohols. The dual role of foam and film can quickly and effectively block the air. Suffocate the fire. It is mainly used to extinguish fires of water-soluble substances such as alcohol, ether, aldehyde, and ketone; it can also extinguish fires of water-insoluble substances such as petroleum and petroleum products. Widely used in large-scale chemical enterprises, oil fields, oil depots, hangars and other fixed fire extinguishing devices, can also be used for mobile fire extinguishing equipment such as fire trucks. The volume mixing ratio with water is 6:94, and the shelf life is 2 years.
        • 胞囊高效灭火剂F500
          2018 - 04 - 24 Release Date: 2018-04-24
          A concentration of 1% can extinguish Class A fires, 3% can extinguish oil fires, and 6% can extinguish alcohol fires and D fires (magnesium, titanium, zinc and other combustible metal fires) to fill domestic fire protection. Agent technology blank. Unlike ordinary fire extinguishing agents, the F-500 foam fire extinguishing agent simultaneously starts from the four aspects of the fire extinguishing principle (fuel, oxygen, heat, and free radicals) to synergistically and effectively destroy the four conditions of fire combustion. The world's most advanced microcystic technology can effectively extinguish fires and control the leakage of dangerous goods and the volatilization of harmful gases; it has a rapid fire extinguishment (6-10 times that of ordinary fire extinguishing agents), instant cooling, prevention of re-ignition, efficient heat insulation, Eliminate thick smoke and other superior performance. Consultation 18112555119 ◎ Performance characteristics 1. Fire extinguishing can reduce the surface tension of water 6-30 times (it can be reduced to 18 dyne / cm). Increase water coverage, increase wetting surface area, increase water permeability and penetration degree. The fire extinguishing performance is increased 6-30 times, and the fire extinguishing function is 6-10 times faster than ordinary fire extinguishing agents. 2. Highly effective heat insulation and prevention of re-ignition. At the same time, it also plays the role of efficient heat insulation gas control: F-500 foam fire extinguishing agent can turn the flammable and explosive gas into a non-flammable material by chemical packaging (microcystic packaging), lock the fire to prevent hydrocarbons The evaporation and spontaneous combustion of dangerous gases such as steam, hydrogen sulfide, and iron sulfide eliminate the basic elements of combustion and explosion. Reduce LEL (Lower Explosive Limit) to a safe level. 3. Eliminate harmful smoke F-500 foam extinguishing agent can ...
        • A类泡沫灭火剂
          2017 - 11 - 22 Release Date: 2017-11-22
          Execution standard number: GB27897 --- 2011 "Class A foam fire extinguishing agent" Description: 1. Class A foam fire extinguishing agent is mainly used to extinguish Class A fire foam extinguishing agents, non-water-soluble liquid fuel fires, and efficient and environmentally friendly fire protection. Fire extinguishing agent. Its characteristics are that it can form a layer of water film on the surface of the fuel that can inhibit fuel evaporation and heat insulation protection. The dual role of foam and water film is not destroyed, it quickly overwhelms the fire and extinguishes the fire. 2. This product is a foam formed by mixing 0.3% of fresh water with fresh water in a certain pressure range, and the foam stays for a long time, mainly extinguishing Class A fires. The fire extinguishing agent is mixed with fresh water at a ratio of 0.6%, and the foam formed in a certain pressure range mainly extinguishes the heat insulation and protection of Class A fires. The fire extinguishing agent is mixed with fresh water at a ratio of 1%, and the foam formed in a certain pressure range is mainly used to extinguish non-water-soluble liquid fuel fires. The fire extinguishing level: IA level. This product can extinguish Class A and B fires. 3. This product is suitable for fresh water, not for sea water. If the product splashes into eyes or skin, wash with plenty of water. This product is not temperature sensitive. Not affected by freezing and melting. 4. Warning words: This product has good stability, non-corrosive, and can be stored closed for a long time. It should be stored in a ventilated, dry and cool place. Do not mix other substances and other types of fire extinguishing agents during storage. The storage temperature of the product should be lower than 45 ° C, which should be stored in the environment above its minimum use temperature. The product is valid for three years.
        • 成膜氟蛋白泡沫灭火剂
          2017 - 11 - 09 Release Date: 2017-11-09
          The fire extinguishing agent is a low-expansion foam extinguishing agent, which is suitable for various low-expansion foam generators. The film-forming fluoroprotein foam fire extinguishing agent uses a compound surfactant, has good compatibility, and is less affected by other fire extinguishing agent varieties. It can be used in combination with dry powder, and it can also be used to extinguish a large oil tank fire. This product is widely used in airports, oil depots, large chemical plants, chemical warehouses, dock chemical depots, military base oil depots, etc.
        • 高倍数泡沫灭火剂
          2017 - 11 - 09 Release Date: 2017-11-09
          High multiple foam fire extinguishing agent is a high and medium general-purpose synthetic foam fire extinguishing agent, which is formulated from foaming agent, co-solvent, stabilizer, antifreeze and water. Scope of application The fire extinguishing agent is a high and medium-sized general-purpose synthetic foam fire extinguishing agent, which can be applied to various types of high and medium-sized foam generators. It is widely used in fire prevention and extinguishing in limited spaces such as underground tunnels, aircraft hangars, underground oil depots, garages, ships, coal mines, etc. It can be used to cover a large area of water-soluble flammable and combustible disperse liquid, and it can play its role.
        • 抗溶性泡沫灭火剂
          2017 - 11 - 09 Release Date: 2017-11-09
          Anti-solvent foam fire extinguishing agent is composed of microbial polysaccharide, hydrocarbon surfactant, fluorocarbon surfactant, preservative, auxiliary and so on. It is produced using the latest high-tech achievements. The fire extinguishing agent belongs to gel-type synthetic foam, has good thixotropic properties, and has the advantages of unlimited restrictions on infusion pipelines, large supply strength, rapid fire suppression, stable storage, and low corrosiveness. It is used for fighting alcohols, esters, and ethers. , Ketones, aldehydes, amines, organic acids and other flammable polar solvent fires can also be used to extinguish oil fires. Application sites are widely used in large-scale chemical plants, chemical fiber plants, paint plants, solvent plants, alcohol plants, breweries, chemical product warehouses, ships and other key disaster prevention places.
        • 不锈钢移动式泡沫灭火装置
          2017 - 11 - 11 Release Date: 2017-11-11
          I. Composition of mobile foam fire extinguishing device: Executive standard: GB20031-2005 semi-fixed foam fire extinguishing device is also called cart-type foam fire extinguishing device. It is a new type of mobile foam fire extinguishing device. Its operation is fast, simple, and reliable. Extinguish fires of Class A, B, and C water-insoluble liquids. It is widely used in municipal residential areas, factories and mines, oil depots, chemical departments, heat treatment workshops, gas stations, large and small ships, etc. It is mainly composed of foam liquid storage tanks, spray guns, proportional mixers, hoses, and cart handles and bottoms. Rounds, etc. Second, the working principle of mobile foam fire extinguishing device: When the mobile foam fire extinguishing device is used to extinguish a fire, the pipe joints at both ends of the pipeline proportional mixer are connected to the fire hose and connected to a pressure water source. When the pressure is not lower than 0.6MPa When the water flowing through the nozzle of the proportional mixer at a very high speed, due to the lateral movement and diffusion of the jet particles, a vacuum (negative pressure) is formed in the chamber of the proportional mixer, so the foam liquid in the foam liquid storage tank is in the atmosphere. Under the action of pressure, it enters the mixer through the suction pipe and mixes with the pressure water, and finally reaches a certain proportion of the mixed liquid. When the mixed liquid with a certain pressure flows to the foam spray gun, because of the performance of the spray gun, a certain amount of air will be sucked in to cause the foam mixed liquid to foam, thereby achieving the effect of foam fire extinguishing.
        • 移动式氮气驱动泡沫灭火装置
          2017 - 09 - 05 Release Date: 2017-09-05
          This device uses high-pressure nitrogen as the power source. Driven by it, the foam mixture in the liquid storage tank is sprayed onto the surface of the material to be burned through the foam-water dual-use cannon, which rapidly cools and generates a layer of flame retardant and isolation. Thin film of air, so as to achieve the purpose of rapid fire extinguishing. Under the traction of power vehicles (trucks, buses, rickshaws, etc.), this device can quickly reach the fire scene, and can accurately aim at the target within a range of 25m. The device consists of a trailer, a liquid storage tank, a foam-water dual-use cannon, and a nitrogen storage and output device.
        • 半固定式(轻便式)泡沫灭火装置
          2017 - 09 - 05 Release Date: 2017-09-05
          I. Composition of mobile foam fire extinguishing device: Implementation standard: GB20031-2005 semi-fixed foam fire extinguishing device is also called cart-type foam fire extinguishing device. It is a new type of mobile foam fire extinguishing device. Its operation is fast, simple, and reliable. Extinguish fires of Class A, B, and C water-insoluble liquids. It is widely used in municipal residential areas, factories and mines, oil depots, chemical departments, heat treatment workshops, gas stations, large and small ships, etc. It is mainly composed of foam liquid storage tanks, spray guns, proportional mixers, hoses, and cart handles and bottoms. Rounds, etc. Second, the working principle of mobile foam fire extinguishing device: When the mobile foam fire extinguishing device is used to extinguish a fire, the pipe joints at both ends of the pipeline proportional mixer are connected to the fire hose and connected to a pressure water source. When the pressure is not lower than 0.6MPa When the water flowing through the nozzle of the proportional mixer at a very high speed, due to the lateral movement and diffusion of the jet particles, a vacuum (negative pressure) is formed in the chamber of the proportional mixer, so the foam liquid in the foam liquid storage tank is in the atmosphere. Under the action of pressure, it enters the mixer through the suction pipe and mixes with the pressure water, and finally reaches a certain proportion of the mixed liquid. When the mixed liquid with a certain pressure flows to the foam spray gun, because of the performance of the spray gun, a certain amount of air will be sucked in to cause the foam mixed liquid to foam, thereby achieving the effect of foam fire extinguishing.
        • PPYZ系列中倍数消防泡沫炮
          2018 - 05 - 12 Release Date: 2018-05-12
          Executive standard: GB15196-2003PPYZ series medium multiple fire-fighting foam gun is the latest self-designed by absorbing the advanced technology of domestic and foreign fire guns. The fire gun has the characteristics of novel appearance, stable and reliable performance, high fire-extinguishing efficiency, mobile and flexible operation. It can realize foam and water spray. Mainly used to extinguish medium-sized oil fires.
        • 快开自泄炮座
          2017 - 11 - 15 Release Date: 2017-11-15
          I. Overview PZ series self-discharging multi-functional gun base. Its anti-collision and pressure-regulating fire hydrant is an imported technology, which retains the advantages of similar foreign products, and improves key parts of it. It is more practical and has excellent performance. For general traditional fire hydrants, the traditional fire hydrants are not easy to open with both hands during emergency use if the pressure is maintained at 1.0 MPa. It even cracked the switch handle. This product can be opened and closed flexibly and quickly under any circumstances, while saving the valve in front of the fire hydrant. Improved the integration of the exit and the fire water monitor. The underground structure is extended on the basis of the fire hydrant, which is suitable as a frost-proof product buried in 1.5 meters below the northern cold area. Second, function introduction The bolt and gun integrated multifunctional self-discharging gun base is a fire fighting equipment with simple operation and automatic drainage and anti-freezing functions. Its structure adopts springs to close the drainage opening and drain the remaining water in the gun base and the inner cavity of the water monitor. When the water cannon is opened by opening the closed mouth of the gun base, the water outlet of the gun base is closed by means of a water pressure compression spring, and the sealing performance is superior and reliable. When the water cannon is shut down by closing the closed mouth of the gun base, the pressure in the inner cavity of the gun base decreases, and the spring automatically pops open to remove the remaining water in the inner space of the gun base and the water gun to prevent frost. When the outlet pressure is large, the outlet pressure can be adjusted by turning on and off the fire wrench to achieve a certain outlet working pressure, so that the water cannon spray reaches the optimal state. At the same time, the self-discharging gun base with integrated bolts and guns has two multi-functions such as 65 catches and 150 suction ports. It can be installed in all kinds of petrochemical, oil fields, docks, ports, key fire-resistant oil irrigation areas, pipelines and other key parts. It is also suitable for various fire trucks (ships), small tankers for municipal and environmental protection.
        • 移动式消防水炮(拖车)
          2017 - 11 - 11 Release Date: 2017-11-11
          First, the product tube implementation standards: GB19156-2003. PSY30-50 mobile fire monitor has a simple structure, stable and reliable performance, flexible operation and convenient maintenance. Two forms of DC injection and spray injection can be realized to meet the needs of various fire extinguishing places. Its flow rate can be adjusted between 30L / s, 40L / s and 50L / s. The product is suitable for fixed fire-fighting equipment equipped with heavy-duty fire trucks, fire-fighting ships, and can also be used as industrial and mining enterprises, warehouses, oil fields, storage tanks. The main specifications, technical parameters and performance are in accordance with the People's Republic of China GB19156-2003 Technical requirements ". Second, the main structure and use method The main structure of the product is shown in the following figure, which is mainly composed of the base, horizontal locking handle, operating handle, gun body, pressure gauge, pitch locking handle, flow adjustment handle, gun head and other components. Before opening the valve on the water inlet pipe of the water gun, the user should first determine its flow rate, and then fix the flow adjustment handle at the required position; then according to the specific conditions of the fire scene, determine whether to use DC injection or spray injection to adjust the gun. The hand wheel of the head can be rotated clockwise and counterclockwise to realize the change of muzzle direct current and spray state. Finally, unscrew the horizontal handle, and control the joystick to achieve horizontal rotation. At the same time, unscrew the pitch handle, and control the joystick to achieve pitch rotation. Align the gun head with the flame area and open the water inlet valve to extinguish the fire on site. 3. Installation and debugging Connect the prepared water hose, valve, interface and fire water monitor interface. After installation, commissioning should be performed. According to the water supply volume of the fire pump, the jet flow is adjusted within the rated working pressure range to ensure the rated working pressure ...
        • 移动式遥控消防泡沫炮
          2017 - 11 - 11 Release Date: 2017-11-11
          Implementation standards: GB19156-2003, GB19157-2003. PLKDY24-48 mobile fire monitor is a new type of touch-control wireless remote fire control product with moderate flow, long range, simple operation, convenient and flexible, complete functions, advanced domestic level, and is a perfect combination of modern high technology and modern fire protection. It can perform remote wireless remote control operation, and can complete a series of operations such as horizontal rotation, tilting up and down of the water cannon. It realizes remote control, far away from the fire field, safe and effective, wide fire suppression area and other superior performances, thus perfecting the new concept of fire fighting and fire fighting, and is an ideal configuration in fire fighting equipment. This product can be placed in various pump fire trucks, raised platform fire trucks, fireboats, fixed fire turrets and flammable and explosive oil refineries, oil tank farms, chemical and other petrochemical enterprises, as well as oil (gas) terminals, Important engineering sites such as airports, berths, large space buildings.
        • 移动式遥控消防水炮
          2017 - 11 - 11 Release Date: 2017-11-11
          Executive standard: GB19156-2003 and GB19157-2003PSKDY20-50 mobile fire cannon is a new type of touch-control wireless remote fire control product with moderate flow, long range, simple operation, convenient and flexible, complete functions, advanced domestic level, modern The perfect combination of high technology and modern fire protection. It can perform remote and wireless remote control operations, and can easily complete a series of operations such as horizontal rotation, pitching up and down, DC spraying of the water cannon. It realizes remote control, far away from the fire field, safe and effective, wide fire suppression area and other superior performances, thus perfecting the new concept of fire fighting and fire fighting, and is an ideal configuration in fire fighting equipment. This product can be placed in various pump fire trucks, raised platform fire trucks, fireboats, fixed fire turrets and flammable and explosive oil refineries, oil tank farms, chemical and other petrochemical enterprises, as well as oil (gas) terminals, Important engineering sites such as airports, berths, large space buildings.
        • 固定式电动消防泡沫炮
          2017 - 11 - 10 Release Date: 2017-11-10
          Implementation standards: GB19156-2003, GB19157-2003. PLKD24-48 fixed fire cannon is a new type of touch-control remote fire-fighting product with moderate flow, long range, simple operation, convenient and flexible. It has complete functions and advanced domestic level, and is a perfect combination of modern high-tech and modern fire protection. It can perform remote and wireless remote control operations, and can complete a series of operations such as horizontal rotation, pitching up and down of the water cannon. The flow can be adjusted in four gears. It realizes remote control, far away from the fire field, safe and effective, wide fire suppression area and other superior performances, thus perfecting the new concept of fire fighting and fire fighting, and is an ideal configuration in fire fighting equipment. This product can be installed in various pump fire trucks, elevated platform fire trucks, fireboats, fixed fire turrets and flammable and explosive oil refineries, oil tank farms, chemical and other petrochemical enterprises, as well as oil (gas) terminals and airports , Ship parking, large space buildings and other important engineering sites.
        • 自动跟踪定位灭火装置(喷头)
          2017 - 11 - 22 Release Date: 2017-11-22
          Performance characteristics: large protection area; strong penetrating power; fast rotation speed; uniform water spray and large spray particles; use the torque generated by the water flow in the spray head to drive the spray head to automatically rotate to achieve uniform spraying; comply with the national standard GB25204-2010 "Automatic tracking and positioning Requirements for Jet Fire Extinguishing Systems;
        • 自动定位灭火装置(防爆型)
          2017 - 11 - 22 Release Date: 2017-11-22
          With the development of society, various high-rise buildings are constantly emerging. The span of tall space buildings is generally more than 100 meters, and the average office building is also more than ten meters. As a result, new problems have also arisen in the technical aspects of fire protection facilities. Compared with this type of building, the traditional indoor automatic sprinkler system has a weak fire extinguishing effect. The automatic search fire extinguishing device developed by our company fills this demand. ZDMS automatic search fire extinguishing device is a fully automatic fire extinguishing device using infrared-guided ultraviolet scanning and microelectronic control technology. It takes only 30 seconds from the discovery of the fire and accurate positioning to the jet fire extinguishing, which quickly and accurately eliminates the fire in the bud status. If a fire occurs within its protection range, the device will start immediately and automatically scan the fire source for precise positioning. Once the fire source is confirmed, it will immediately open the solenoid valve to spray water. The device can extinguish fires and avoid water damage, and is a modern intelligent fire extinguishing equipment. The system has the characteristics of modular structure, convenient installation, simple wiring, easy commissioning, low cost, less equipment, simple wiring, and low failure rate. Part of the connection line is specially provided by the manufacturer (aerial plug connection line), to avoid the possibility of the cable being misplaced.
        • 智能型灭火系统主机
          2017 - 11 - 22 Release Date: 2017-11-22
          The main unit of the intelligent fire extinguishing system is composed of a standard piano table (length, width and height: 96 × 60 × 114cm) with an intelligent centralized control panel, power control panel and video monitoring system, as shown in Figure 2.2. The IOT intelligent centralized control panel adopts a graphical full-touch operation mode, with a friendly interface and convenient operation. It can control and monitor the fire extinguishing device in the entire fire protection zone. In the event of a fire, the IIoT intelligent centralized control panel will notify the person responsible for fire prevention by short message (optional), and record the alarm and fire extinguishing status of all equipment in the fire protection zone. The power control panel uses physical buttons to take charge of the entire system's power supply and pump control ; The main control software system can monitor the situation in the fire zone in real time. 1.ZDZJ-ZX-01 IOT Intelligent Centralized Control Panel (1) Function Overview ZDMZJ-ZX-01 The centralized control panel of the fire extinguishing device manages the field control box of the fire extinguishing device by CAN bus. Each centralized control panel is based on the CAN bus. Management of up to 50 on-site manual control boxes in a fire protection zone. Using this host can check the fire situation on site through video systems such as security, and manually control the fire extinguishing device to extinguish the fire. The host adopts 7-inch high-brightness TFT touch screen for display and control, and uses a rich graphical interface to realize comprehensive centralized monitoring and management of the on-site fire extinguishing device. The host has a smart networking function (optional), a cloud server that can transmit the operation information of the fire extinguishing device, and use the PC or mobile phone to check the operation status and self-check records of the fire extinguishing device at any time; when a fire alarm or equipment failure occurs, it can be the first The time is sent to the person in charge via SMS. (2) Technical specifications ● Working voltage: DC24V ● Power consumption: ≤10W ● Operating temperature: 0 ~ 45 ℃ ● Storage temperature: -10 ~ 60 ℃ ● Relative humidity: ≤90% (40 ℃) ● Number of extensions: 50. ..
        • 自动跟踪定位灭火装置(30升)
          2017 - 11 - 15 Release Date: 2017-11-15
          With the development of society, various high-rise buildings are constantly emerging. The span of tall space buildings is generally more than 100 meters, and the average office building is also more than ten meters. As a result, new problems have also arisen in the technical aspects of fire protection facilities. Compared with this type of building, the traditional indoor automatic sprinkler system has a weak fire extinguishing effect. The automatic search fire extinguishing device developed by our company fills this demand. ZDMS automatic search fire extinguishing device is a fully automatic fire extinguishing device using infrared-guided ultraviolet scanning and microelectronic control technology. It takes only 30 seconds from the discovery of the fire and accurate positioning to the jet fire extinguishing, which quickly and accurately eliminates the fire in the bud status. If a fire occurs within its protection range, the device will start immediately and automatically scan the fire source for precise positioning. Once the fire source is confirmed, it will immediately open the solenoid valve to spray water. The device can extinguish fires and avoid water damage, and is a modern intelligent fire extinguishing equipment. The system has the characteristics of modular structure, convenient installation, simple wiring, easy commissioning, low cost, less equipment, simple wiring, and low failure rate. Part of the connection line is specially provided by the manufacturer (aerial plug connection line), to avoid the possibility of the cable being misplaced.
        • 自动跟踪定位灭火装置(20升)
          2017 - 11 - 15 Release Date: 2017-11-15
          With the development of society, various high-rise buildings are constantly emerging. The span of tall space buildings is generally more than 100 meters, and the average office building is also more than ten meters. As a result, new problems have also arisen in the technical aspects of fire protection facilities. Compared with this type of building, the traditional indoor automatic sprinkler system has a weak fire extinguishing effect. The automatic search fire extinguishing device developed by our company fills this demand. ZDMS automatic search fire extinguishing device is a fully automatic fire extinguishing device using infrared-guided ultraviolet scanning and microelectronic control technology. It takes only 30 seconds from the discovery of the fire and accurate positioning to the jet fire extinguishing, which quickly and accurately eliminates the fire in the bud status. If a fire occurs within its protection range, the device will start immediately and automatically scan the fire source for precise positioning. Once the fire source is confirmed, it will immediately open the solenoid valve to spray water. The device can extinguish fires and avoid water damage, and is a modern intelligent fire extinguishing equipment. The system has the characteristics of modular structure, convenient installation, simple wiring, easy commissioning, low cost, less equipment, simple wiring, and low failure rate. Part of the connection line is specially provided by the manufacturer (aerial plug connection line), to avoid the possibility of the cable being misplaced.
        • 自动跟踪定位灭火装置(5L)
          2017 - 11 - 15 Release Date: 2017-11-15
          With the development of society, various high-rise buildings are constantly emerging. The span of tall space buildings is generally more than 100 meters, and the average office building is also more than ten meters. As a result, new problems have also arisen in the technical aspects of fire protection facilities. Compared with this type of building, the traditional indoor automatic sprinkler system has a weak fire extinguishing effect. The automatic search fire extinguishing device developed by our company fills this demand. ZDMS automatic search fire extinguishing device is a fully automatic fire extinguishing device using infrared-guided ultraviolet scanning and microelectronic control technology. It takes only 30 seconds from the discovery of the fire and accurate positioning to the jet fire extinguishing, which quickly and accurately eliminates the fire in the bud status. If a fire occurs within its protection range, the device will start immediately and automatically scan the fire source for precise positioning. Once the fire source is confirmed, it will immediately open the solenoid valve to spray water. The device can extinguish fires and avoid water damage, and is a modern intelligent fire extinguishing equipment. The system has the characteristics of modular structure, convenient installation, simple wiring, easy commissioning, low cost, less equipment, simple wiring, and low failure rate. Part of the connection line is specially provided by the manufacturer (aerial plug connection line), to avoid the possibility of the cable being misplaced.
        • 泡沫消火栓箱(弧形铁门)
          2017 - 11 - 15 Release Date: 2017-11-15
          I. Composition of foam fire hydrant box: Foam fire hydrant box is a simple and efficient national foam fire extinguishing equipment, which is widely used. Foam hydrant box is mainly composed of proportional mixer, foam gun, DC water gun, foam liquid tank, hose reel, fire hose, fire hydrant, fixed plate, guide frame, filter and so on. Second, the working principle of the foam hydrant box: When the foam hydrant box is extinguishing fire when the pressure of not less than 0.6MPa flows through the pipeline and the pipeline proportional mixer of the foam hydrant box at a high speed, due to the lateral movement of the jet mass point The diffusion effect causes a vacuum (negative pressure) in the chamber of the proportional mixer, so the foam liquid in the foam liquid reservoir enters the mixer through the suction pipe under the action of atmospheric pressure, and mixes with the pressure water to finally reach a certain proportion of the mixed liquid. . When the mixed liquid with a certain pressure flows to the spray gun, the foamed mixed liquid foams. So as to achieve the effect of foam fire. Installation, commissioning and use of foam hydrant box: 1) Installation of foam hydrant box: Fix the foam hydrant box in the place where protection is needed, and make the door opening and closing of the foam hydrant box convenient. Connect the fire piping to the water inlet ball valve of the foam hydrant box. 2) Debugging the foam hydrant box: Adjust the water pressure of the fire hydrant pipe to the required pressure range, open the water inlet ball valve of the foam hydrant box, then remove the spray gun and open it, and at the same time drag the fire hose to the specified position. The spray nozzle sprays foam mixture. '...
        • 泡沫消火栓箱(不锈钢平面门)
          2017 - 11 - 15 Release Date: 2017-11-15
          I. Composition of foam fire hydrant box: Foam fire hydrant box is a simple and efficient national foam fire extinguishing equipment, which is widely used. Foam hydrant box is mainly composed of proportional mixer, foam gun, DC water gun, foam liquid tank, hose reel, fire hose, fire hydrant, fixed plate, guide frame, filter and so on. Second, the working principle of the foam hydrant box: When the foam hydrant box is extinguishing fire when the pressure of not less than 0.6MPa flows through the pipeline and the pipeline proportional mixer of the foam hydrant box at a high speed, due to the lateral movement of the jet mass point The diffusion effect causes a vacuum (negative pressure) in the chamber of the proportional mixer, so the foam liquid in the foam liquid reservoir enters the mixer through the suction pipe under the action of atmospheric pressure, and mixes with the pressure water to finally reach a certain proportion of the mixed liquid. . When the mixed liquid with a certain pressure flows to the spray gun, the foamed mixed liquid foams. So as to achieve the effect of foam fire. Installation, commissioning and use of foam hydrant box: 1) Installation of foam hydrant box: Fix the foam hydrant box in the place where protection is needed, and make the door opening and closing of the foam hydrant box convenient. Connect the fire piping to the water inlet ball valve of the foam hydrant box. 2) Debugging the foam hydrant box: Adjust the water pressure of the fire hydrant pipe to the required pressure range, open the water inlet ball valve of the foam hydrant box, then remove the spray gun and open it, and at the same time drag the fire hose to the specified position. The spray nozzle sprays foam mixture. '...
        • 泡沫消火栓箱(三开平面)
          2017 - 11 - 15 Release Date: 2017-11-15
          I. Composition of foam fire hydrant box: Foam fire hydrant box is a simple and efficient national foam fire extinguishing equipment, which is widely used. Foam hydrant box is mainly composed of proportional mixer, foam gun, DC water gun, foam liquid tank, hose reel, fire hose, fire hydrant, fixed plate, guide frame, filter and so on. Second, the working principle of the foam hydrant box: When the foam hydrant box is extinguishing fire when the pressure of not less than 0.6MPa flows through the pipeline and the pipeline proportional mixer of the foam hydrant box at a high speed, due to the lateral movement of the jet mass point The diffusion effect causes a vacuum (negative pressure) in the chamber of the proportional mixer, so the foam liquid in the foam liquid reservoir enters the mixer through the suction pipe under the action of atmospheric pressure, and mixes with the pressure water to finally reach a certain proportion of the mixed liquid. . When the mixed liquid with a certain pressure flows to the spray gun, the foamed mixed liquid foams. So as to achieve the effect of foam fire. Installation, commissioning and use of foam hydrant box: 1) Installation of foam hydrant box: Fix the foam hydrant box in the place where protection is needed, and make the door opening and closing of the foam hydrant box convenient. Connect the fire piping to the water inlet ball valve of the foam hydrant box. 2) Debugging the foam hydrant box: Adjust the water pressure of the fire hydrant pipe to the required pressure range, open the water inlet ball valve of the foam hydrant box, then remove the spray gun and open it, and at the same time drag the fire hose to the specified position. The spray nozzle sprays foam mixture. '...
        • 泡沫消火栓箱(弧形门)
          2017 - 11 - 15 Release Date: 2017-11-15
          I. Composition of foam fire hydrant box: Foam fire hydrant box is a simple and efficient national foam fire extinguishing equipment, which is widely used. Foam hydrant box is mainly composed of proportional mixer, foam gun, DC water gun, foam liquid tank, hose reel, fire hose, fire hydrant, fixed plate, guide frame, filter and so on. Second, the working principle of the foam hydrant box: When the foam hydrant box is extinguishing fire when the pressure of not less than 0.6MPa flows through the pipeline and the pipeline proportional mixer of the foam hydrant box at a high speed, due to the lateral movement of the jet mass point The diffusion effect causes a vacuum (negative pressure) in the chamber of the proportional mixer, so the foam liquid in the foam liquid reservoir enters the mixer through the suction pipe under the action of atmospheric pressure, and mixes with the pressure water to finally reach a certain proportion of the mixed liquid. . When the mixed liquid with a certain pressure flows to the spray gun, the foamed mixed liquid foams. So as to achieve the effect of foam fire. Installation, commissioning and use of foam hydrant box: 1) Installation of foam hydrant box: Fix the foam hydrant box in the place where protection is needed, and make the door opening and closing of the foam hydrant box convenient. Connect the fire piping to the water inlet ball valve of the foam hydrant box. 2) Debugging the foam hydrant box: Adjust the water pressure of the fire hydrant pipe to the required pressure range, open the water inlet ball valve of the foam hydrant box, then remove the spray gun and open it, and at the same time drag the fire hose to the specified position. The spray nozzle sprays foam mixture. '...
        • 泡沫消火栓
          2017 - 11 - 15 Release Date: 2017-11-15
          I. Product Introduction Foam fire hydrant is a kind of fire-fighting equipment with reliable performance, simple operation and quick and easy opening and closing. It has functions such as quick switching, convenient and quick linking. It can be installed on the city's foam mixed liquid outlet pipes, and is mainly used for foam mixed liquid facilities for fire brigade fire fighting. Suitable for oil depots, streets, factories, warehouses, chemical plants. And various petrochemical, oilfield terminals, ports and other key fire-resistant oil tank areas, pipelines and other key parts. Can also be applied to municipal, environmental protection and other fire protection special pipelines. Easy to use, fast and efficient. The foam fire hydrant is mainly composed of the body, the valve body, the base, the bulkhead, the interface and other components. The structure is compact, the shape is beautiful, and the whole is coated with a large red alkyd magnetic paint. Performance of main components 1. Ball valve: made of copper alloy, with corrosion resistance, the overall operation is simple and convenient. 2. Body: The body is made of seamless steel pipe, and the interior is treated with anticorrosive paint. III. Installation requirements 1. According to the design requirements and regulations of fire engineering projects, select the model and specification of the fire hydrant on the ground, and at the same time, determine the depth of the anti-freeze and the total height of the fire hydrant according to the different environments and regions. 2. The user can use the branch pipe installation method or the dry pipe installation method according to the actual needs, and the connection size does not change. 3. The fire hydrant is connected to the pipeline flange by bolts. 4. After all the links are connected, perform a 1.6MPa pressure seal test to check whether the opening, closing and drainage sealing functions are intact and qualified. 6. Installation precautions: a) When bolts are connected, the bolts should be tightened symmetrically to ensure that the bolts are evenly stressed. b) The pipeline must be cleaned before and after installation. If there are debris in the pipeline, it should be cleaned in time, otherwise the sealing of the hydrant will be affected. 4. Operation 1. Push the handle by hand clockwise to return the wrench to its original position, that is, the fire hydrant is completely closed. 2. Note when opening or closing: a) Open or close to ...
        • 泡沫消火栓箱(300L)
          2017 - 09 - 05 Release Date: 2017-09-05
          I. Composition of foam fire hydrant box: Foam fire hydrant box is a simple and efficient national foam fire extinguishing equipment, which is widely used. Foam fire hydrant box is mainly composed of proportional mixer, foam gun, foam liquid tank, fire hose, fire hydrant, etc .: 2. The working principle of foam fire hydrant box: When fire extinguishing, the foam fire hydrant box has a pressure of not less than 0.6MPa. When flowing through the pipeline and pipeline proportion mixer of the foam hydrant box at a very high speed, a vacuum (negative pressure) is formed in the chamber of the proportion mixer due to the diffusive effect of the lateral movement of the jet particles, so the foam liquid in the foam liquid storage is in the atmosphere Under the action of the pressure, it enters the mixer through the pipette and mixes with the pressure water, and finally reaches a certain proportion of the mixed liquid. When the mixed liquid with a certain pressure flows to the spray gun, the foamed mixed liquid foams. So as to achieve the effect of foam fire.
      Qualification honor
      HONOR SERVICE & HONOR
      • plkd检测报告
      • PC检测报告
      • PCL检测报告
      • pf4检测报告
      • phf检测报告
      • phym24-10检测报告
      • phym32-30检测报告
      / NEWS News / NEWS
      平衡式泡沫灭火装置需要注意的三点事项
      As a safe and efficient balanced foam fire extinguishing device in the fire protection field, whenever a disaster occurs, firefighters can always be seen carrying the critically acclaimed balanced foam fire extinguishing device and rushing to the front line of rescue work to control the scale of the fire. live. According to the working characteristics of the device, the following points need to be noted for the balanced foam fire extinguishing device. I. Sufficient foam liquid reserves Fires may occur suddenly at any time and anywhere. In order to resist the disaster in time, it is necessary to ensure that the balanced foam fire extinguishing device is equipped with sufficient foam liquid when extinguishing the fire. Therefore, during the standby and standby periods of the equipment, the foam liquid in the diversified balanced foam fire extinguishing device storage tanks must be sufficient, and in order to shorten the foam liquid from the foam liquid storage tank to the mixer during the use of fire suppression, Liquid supply time, the foam foam in the pipeline of the balanced foam fire extinguishing device must also be sufficient. Second, foam liquid quality assurance. If it is found that the foam liquid deteriorates due to long storage time, it needs to be replaced immediately. It should also be noted that when the foam liquid is first filled, the tank of the balanced foam fire extinguishing device is flushed and the water is discharged. In order to work in a disaster situation, the delay can be controlled in time. The type of foam liquid in a stable and safe balanced foam fire extinguishing device must meet the requirements of the device, and no impurities are allowed to be mixed. 3. Reasonable storage environment In order to ensure that the balanced foam fire extinguishing device can be used normally at any time and place, it must be placed in an environmental space with reasonable temperature during normal storage. The foam liquid pump must be operated strictly in accordance with the instructions when using it, pay attention to the normal range of pressure, and pay attention not to completely close the inlet and outlet valves and leave a certain gap. It should also be cleaned in time after use to prevent the balanced foam fire extinguishing device from being corroded by the foam liquid. The brief introduction of the balanced foam fire extinguishing device is as described above. When purchasing, pay attention to find reliable channels for the wholesale and retail of balanced foam fire extinguishing device manufacturers. Only the management or technical omission of certain details may cause great damage to the ecological environment. Bring irreparable harm and loss.
      - 06 - 20 2019-06-20
      平衡式泡沫灭火装置的三个优点分析
      The balanced foam fire extinguishing device realizes a good fire extinguishing function of the device according to the scientific mixing ratio. It is a relatively advanced fire extinguishing instrument so far. At this stage, it is mainly used in petrochemical, dock transportation, gas stations, and fire protection projects of various buildings. While the balanced foam fire extinguishing device can be so widely loved and welcomed, it must have its outstanding advantages. Here are some advantages of the balanced foam fire extinguishing device. 1. The foam ratio is scientific and reasonable. It is well known that the foam mixing ratio in a foam fire extinguishing device is very critical to the effectiveness and power of the entire device. The high-end balanced foam fire extinguishing device uses a reasonable and scientific foam liquid volume ratio to make it one of the sharp weapons to control the fire. In addition, the balanced foam fire extinguishing device can add foam at any time and place during the use of the device, which is not only reliable but also very flexible, and meets the fire extinguishing needs of modern large-scale building fire protection projects. 2. It has a wide range of applications and is compatible with highly balanced foam fire extinguishing devices. It can be applied to any foam fire extinguisher currently on the market. You can choose to install a protein foam fire extinguisher for fire fighting and rescue, or you can choose to put the loaded protein foam fire extinguisher into use, and you can also add water film foam fire extinguishers that are often seen in real life. A variety of balanced foam fire extinguishing devices allow professional users to freely configure according to their own needs and the specific conditions of the site. 3. Stable performance and high reliability Foam fire extinguishing device adopts atmospheric pressure stainless steel foam liquid storage tank, which is safe and sturdy and can carry out fire fighting work for a long time. The built-in stainless steel foam liquid gear pump supplies foam liquid, so that the working pressure and flow rate of the foam mixed liquid have a large adaptation range, and it will not rust due to the corrosion of the foam liquid. Its backflow guarantees that the rated working pressure set by the device is very stable. This makes the stable and safe balanced foam fire extinguishing device recognized and loved by the industry. Driven by the rapid economic growth, grassroots construction is booming and stable. The balanced foam fire extinguishing device in the field of fire protection industry has been used more and more widely. The balanced foam fire extinguishing device relies on the scientific and reasonable foam ratio, stable performance, high reliability, and wide compatibility and other advantages. development of.
      - 06 - 20 2019-06-20
      消防炮为什么广受业内认可
      Fire-fighting water cannons are mainly composed of water inlet pipe, slewing body, water collecting pipe, and jet adjustment ring. By increasing the internal water pressure, they become the best equipment for remote fire suppression. In recent years, high-quality fire monitors have been put into use in the field of fire disaster mitigation, and they have also been recognized by various fields including fire teams. So why are fire monitors so recognized in the industry? First, there is a high degree of flexibility. The overall size of the fire cannon is relatively light. When it is installed in a fire truck, it can be used for horizontal rotation and pitch rotation. It can easily adjust the angle and distance of the spray. To very good effect. And because these fire cannons are small in weight and small in size, fire fighting vehicles can be equipped with multiple at one time, which is very helpful in suppressing the spread of fire. Second, it is suitable for many types of fire fighting. Fire cannons are divided into two types: fire water cannons and fire foam cannons. As the name implies, fire water cannons use jet water to play a role in extinguishing fires. Fire cannons spray air foam and are mainly used in some areas that are not suitable for water fire fighting, such as fires caused by some chemical products. Third, the scope of application is wide. In terms of the use and use of fire monitors, not only fire fighting vehicles can be equipped with fire monitors, but some large enterprises can also be equipped with some reliable fire monitors for prevention and emergency. These areas include, but are not limited to, places such as petrochemical companies, storage tank areas, aircraft hangars, warehouses, ports and docks. It can be said that fire cannons can play a very wide range of uses. Therefore, in general, fire cannons can not only be used as important equipment for fire rescue and disaster relief, but also one of the essential items for prevention and emergency rescue in various industries. It is precisely for this purpose that various types of high-quality fire monitors can also be recognized for their excellent flexibility and applicability, and become the first choice for fire suppression and disaster reduction in various industries.
      - 06 - 20 2019-06-20
      消防炮有哪些产品优势
      Fire cannon is a kind of equipment that is widely equipped on fire fighting vehicles. It is also used as an important weapon for preventing fires and emergency relief in emergency situations such as hangars, warehouses and other large warehouses, petrochemical companies and ports. It is used so widely, on the one hand, because its role is indeed recognized in the industry, and on the other hand, its outstanding advantages make it stand out in the field of fire equipment. These advantages include the following. 1. Good portability. Fire guns are designed not only with the effect of fire suppression, but also with the efficiency of fire suppression. Therefore, many high-quality fire guns have the advantages of light weight and small volume, not only in the event of fire. It can be transferred to the scene at a faster speed for fire fighting at the same time. At the same time, the fire truck can be equipped with a sufficient number to improve the efficiency of fire fighting. 2. The reason why fire cannons with a long fire extinguishing distance can be widely used in various large warehouses such as aircraft hangars, warehouses, petrochemical companies and ports, etc., is mainly because they can actually use the internal slewing body, jet adjustment ring The equal structure realizes the increase of water pressure and long-distance spraying, so as to achieve the purpose of remote fire extinguishing, and directly solves the problem that fire extinguishers cannot approach the fire field in a large area fire. 3. The construction cost is relatively low. From the perspective of the overall structural design of the fire monitor, the overall construction cost is not high, especially compared to some large-scale fire extinguishing equipment. The lightness of the fire monitor allows it to be transported to the fire site faster to achieve efficient fire fighting. From this point of view, its cost performance is far higher than other equipment, especially in the early stage of suppressing the fire or directly extinguishing the scene, the cost performance is even more prominent. Therefore, in general, high-quality fire cannons are an indispensable and important member of fire fighting equipment. At the same time, their high mobility, wide coverage and high cost performance make them a must-have equipment in the field of fire disaster relief. One, and with the input of more research and development forces, fire guns with longer range and better fire extinguishing effect will be developed and put into practical rescue and disaster relief in the future.
      - 06 - 12 2019-06-12
      平衡式泡沫灭火装置需要注意的三点事项
      As a safe and efficient balanced foam fire extinguishing device in the fire protection field, whenever a disaster occurs, firefighters can always be seen carrying the critically acclaimed balanced foam fire extinguishing device and rushing to the front line of rescue work to control the scale of the fire. live. According to the working characteristics of the device, the following points need to be noted for the balanced foam fire extinguishing device. I. Sufficient foam liquid reserves Fires may occur suddenly at any time and anywhere. In order to resist the disaster in time, it is necessary to ensure that the balanced foam fire extinguishing device is equipped with sufficient foam liquid when extinguishing the fire. Therefore, during the standby and standby periods of the equipment, the foam liquid in the diversified balanced foam fire extinguishing device storage tanks must be sufficient, and in order to shorten the foam liquid from the foam liquid storage tank to the mixer during the use of fire suppression, Liquid supply time, the foam foam in the pipeline of the balanced foam fire extinguishing device must also be sufficient. Second, foam liquid quality assurance. If it is found that the foam liquid deteriorates due to long storage time, it needs to be replaced immediately. It should also be noted that when the foam liquid is first filled, the tank of the balanced foam fire extinguishing device is flushed and the water is discharged. In order to work in a disaster situation, the delay can be controlled in time. The type of foam liquid in a stable and safe balanced foam fire extinguishing device must meet the requirements of the device, and no impurities are allowed to be mixed. 3. Reasonable storage environment In order to ensure that the balanced foam fire extinguishing device can be used normally at any time and place, it must be placed in an environmental space with reasonable temperature during normal storage. The foam liquid pump must be operated strictly in accordance with the instructions when using it, pay attention to the normal range of pressure, and pay attention not to completely close the inlet and outlet valves and leave a certain gap. It should also be cleaned in time after use to prevent the balanced foam fire extinguishing device from being corroded by the foam liquid. The brief introduction of the balanced foam fire extinguishing device is as described above. When purchasing, pay attention to find reliable channels for the wholesale and retail of balanced foam fire extinguishing device manufacturers. Only the management or technical omission of certain details may cause great damage to the ecological environment. Bring irreparable harm and loss.
      - 06 - 20 2019-06-20
      平衡式泡沫灭火装置的三个优点分析
      The balanced foam fire extinguishing device realizes a good fire extinguishing function of the device according to the scientific mixing ratio. It is a relatively advanced fire extinguishing instrument so far. At this stage, it is mainly used in petrochemical, dock transportation, gas stations, and fire protection projects of various buildings. While the balanced foam fire extinguishing device can be so widely loved and welcomed, it must have its outstanding advantages. Here are some advantages of the balanced foam fire extinguishing device. 1. The foam ratio is scientific and reasonable. It is well known that the foam mixing ratio in a foam fire extinguishing device is very critical to the effectiveness and power of the entire device. The high-end balanced foam fire extinguishing device uses a reasonable and scientific foam liquid volume ratio to make it one of the sharp weapons to control the fire. In addition, the balanced foam fire extinguishing device can add foam at any time and place during the use of the device, which is not only reliable but also very flexible, and meets the fire extinguishing needs of modern large-scale building fire protection projects. 2. It has a wide range of applications and is compatible with highly balanced foam fire extinguishing devices. It can be applied to any foam fire extinguisher currently on the market. You can choose to install a protein foam fire extinguisher for fire fighting and rescue, or you can choose to put the loaded protein foam fire extinguisher into use, and you can also add water film foam fire extinguishers that are often seen in real life. A variety of balanced foam fire extinguishing devices allow professional users to freely configure according to their own needs and the specific conditions of the site. 3. Stable performance and high reliability Foam fire extinguishing device adopts atmospheric pressure stainless steel foam liquid storage tank, which is safe and sturdy and can carry out fire fighting work for a long time. The built-in stainless steel foam liquid gear pump supplies foam liquid, so that the working pressure and flow rate of the foam mixed liquid have a large adaptation range, and it will not rust due to the corrosion of the foam liquid. Its backflow guarantees that the rated working pressure set by the device is very stable. This makes the stable and safe balanced foam fire extinguishing device recognized and loved by the industry. Driven by the rapid economic growth, grassroots construction is booming and stable. The balanced foam fire extinguishing device in the field of fire protection industry has been used more and more widely. The balanced foam fire extinguishing device relies on the scientific and reasonable foam ratio, stable performance, high reliability, and wide compatibility and other advantages. development of.
      - 06 - 20 2019-06-20
      消防炮为什么广受业内认可
      Fire-fighting water cannons are mainly composed of water inlet pipe, slewing body, water collecting pipe, and jet adjustment ring. By increasing the internal water pressure, they become the best equipment for remote fire suppression. In recent years, high-quality fire monitors have been put into use in the field of fire disaster mitigation, and they have also been recognized by various fields including fire teams. So why are fire monitors so recognized in the industry? First, there is a high degree of flexibility. The overall size of the fire cannon is relatively light. When it is installed in a fire truck, it can be used for horizontal rotation and pitch rotation. It can easily adjust the angle and distance of the spray. To very good effect. And because these fire cannons are small in weight and small in size, fire fighting vehicles can be equipped with multiple at one time, which is very helpful in suppressing the spread of fire. Second, it is suitable for many types of fire fighting. Fire cannons are divided into two types: fire water cannons and fire foam cannons. As the name implies, fire water cannons use jet water to play a role in extinguishing fires. Fire cannons spray air foam and are mainly used in some areas that are not suitable for water fire fighting, such as fires caused by some chemical products. Third, the scope of application is wide. In terms of the use and use of fire monitors, not only fire fighting vehicles can be equipped with fire monitors, but some large enterprises can also be equipped with some reliable fire monitors for prevention and emergency. These areas include, but are not limited to, places such as petrochemical companies, storage tank areas, aircraft hangars, warehouses, ports and docks. It can be said that fire cannons can play a very wide range of uses. Therefore, in general, fire cannons can not only be used as important equipment for fire rescue and disaster relief, but also one of the essential items for prevention and emergency rescue in various industries. It is precisely for this purpose that various types of high-quality fire monitors can also be recognized for their excellent flexibility and applicability, and become the first choice for fire suppression and disaster reduction in various industries.
      - 06 - 20 2019-06-20
      消防炮有哪些产品优势
      Fire cannon is a kind of equipment that is widely equipped on fire fighting vehicles. It is also used as an important weapon for preventing fires and emergency relief in emergency situations such as hangars, warehouses and other large warehouses, petrochemical companies and ports. It is used so widely, on the one hand, because its role is indeed recognized in the industry, and on the other hand, its outstanding advantages make it stand out in the field of fire equipment. These advantages include the following. 1. Good portability. Fire guns are designed not only with the effect of fire suppression, but also with the efficiency of fire suppression. Therefore, many high-quality fire guns have the advantages of light weight and small volume, not only in the event of fire. It can be transferred to the scene at a faster speed for fire fighting at the same time. At the same time, the fire truck can be equipped with a sufficient number to improve the efficiency of fire fighting. 2. The reason why fire cannons with a long fire extinguishing distance can be widely used in various large warehouses such as aircraft hangars, warehouses, petrochemical companies and ports, etc., is mainly because they can actually use the internal slewing body, jet adjustment ring The equal structure realizes the increase of water pressure and long-distance spraying, so as to achieve the purpose of remote fire extinguishing, and directly solves the problem that fire extinguishers cannot approach the fire field in a large area fire. 3. The construction cost is relatively low. From the perspective of the overall structural design of the fire monitor, the overall construction cost is not high, especially compared to some large-scale fire extinguishing equipment. The lightness of the fire monitor allows it to be transported to the fire site faster to achieve efficient fire fighting. From this point of view, its cost performance is far higher than other equipment, especially in the early stage of suppressing the fire or directly extinguishing the scene, the cost performance is even more prominent. Therefore, in general, high-quality fire cannons are an indispensable and important member of fire fighting equipment. At the same time, their high mobility, wide coverage and high cost performance make them a must-have equipment in the field of fire disaster relief. One, and with the input of more research and development forces, fire guns with longer range and better fire extinguishing effect will be developed and put into practical rescue and disaster relief in the future.
      - 06 - 12 2019-06-12
      / 六台宝典开奖软件 六台宝典开奖软件
      武汉鑫澳龙消防设备有限公司座落在著名的武汉三镇的汉口,是一家集研发、生产、销售、服务为一体的新型高新技术企业。 Wuhan Xinaolong Fire Fighting Equipment Co., Ltd. is a new high-tech enterprise integrating R & D, production, sales and service. The company specializes in the production and sales of various fire fighting equipment and fire fighting equipment, and has played an active role in the domestic fire protection field. The company mainly produces high, medium and low multiple foam fire fighting equipment and foam fire extinguishing agents. The main products are PHYM1-15 ton foam proportion mixing device, foam spray fire extinguishing system; BGP-200 electric explosion-proof high-power foam generator; PF-4 water-wheel high-power foam generator; PZ series medium-power foam generator; PC Series low-power foam generators; PQ series air foam guns; PL series fire-fighting foam guns; PS series fire-fighting water cannons; PSKD / PLKD series electric remote-control fire-fighting guns; high-, medium- and low-power foam extinguishing agents. Among them, the high, medium and low multiple foam generators and foam fire extinguishing agents are currently domestic manufacturers with comprehensive production technology and complete products. The company's products have passed the national fixed fire extinguishing system and refractory component quality inspection center (NO: 95095, NO: 9707) The inspection test identified it as a safe, qualified and environmentally friendly product. The product is non-toxic, odorless, and non-polluting. All products have withstood the rigorous test of the market and received unanimous praise from customers. We attach great importance to product quality, adhere to quality for survival, reputation for development, as always, pursue high-quality service and quality, and continue to use new technologies, new materials and new technologies to introduce newer and better fire protection products to users at home and abroad. Create more value for new and old customers!
      +
      <
      • 平衡式泡沫灭火装置需要注意的三点事项
        As a safe and efficient balanced foam fire extinguishing device in the fire protection field, whenever a disaster occurs, firefighters can always be seen carrying the critically acclaimed balanced foam fire extinguishing device and rushing to the front line of rescue work to control the scale of the fire. live. According to the working characteristics of the device, the following points need to be noted for the balanced foam fire extinguishing device. I. Sufficient foam liquid reserves Fires may occur suddenly at any time and anywhere. In order to resist the disaster in time, it is necessary to ensure that the balanced foam fire extinguishing device is equipped with sufficient foam liquid when extinguishing the fire. Therefore, during the standby and standby periods of the equipment, the foam liquid in the diversified balanced foam fire extinguishing device storage tanks must be sufficient, and in order to shorten the foam liquid from the foam liquid storage tank to the mixer during the use of fire suppression, Liquid supply time, the foam foam in the pipeline of the balanced foam fire extinguishing device must also be sufficient. Second, foam liquid quality assurance. If it is found that the foam liquid deteriorates due to long storage time, it needs to be replaced immediately. It should also be noted that when the foam liquid is first filled, the tank of the balanced foam fire extinguishing device is flushed and the water is discharged. In order to work in a disaster situation, the delay can be controlled in time. The type of foam liquid in a stable and safe balanced foam fire extinguishing device must meet the requirements of the device, and no impurities are allowed to be mixed. 3. Reasonable storage environment In order to ensure that the balanced foam fire extinguishing device can be used normally at any time and place, it must be placed in an environmental space with reasonable temperature during normal storage. The foam liquid pump must be operated strictly in accordance with the instructions when using it, pay attention to the normal range of pressure, and pay attention not to completely close the inlet and outlet valves and leave a certain gap. It should also be cleaned in time after use to prevent the balanced foam fire extinguishing device from being corroded by the foam liquid. The brief introduction of the balanced foam fire extinguishing device is as described above. When purchasing, pay attention to find reliable channels for the wholesale and retail of balanced foam fire extinguishing device manufacturers. Only the management or technical omission of certain details may cause great damage to the ecological environment. Bring irreparable harm and loss.
      • 平衡式泡沫灭火装置的三个优点分析
        The balanced foam fire extinguishing device realizes a good fire extinguishing function of the device according to the scientific mixing ratio. It is a relatively advanced fire extinguishing instrument so far. At this stage, it is mainly used in petrochemical, dock transportation, gas stations, and fire protection projects of various buildings. While the balanced foam fire extinguishing device can be so widely loved and welcomed, it must have its outstanding advantages. Here are some advantages of the balanced foam fire extinguishing device. 1. The foam ratio is scientific and reasonable. It is well known that the foam mixing ratio in a foam fire extinguishing device is very critical to the effectiveness and power of the entire device. The high-end balanced foam fire extinguishing device uses a reasonable and scientific foam liquid volume ratio to make it one of the sharp weapons to control the fire. In addition, the balanced foam fire extinguishing device can add foam at any time and place during the use of the device, which is not only reliable but also very flexible, and meets the fire extinguishing needs of modern large-scale building fire protection projects. 2. It has a wide range of applications and is compatible with highly balanced foam fire extinguishing devices. It can be applied to any foam fire extinguisher currently on the market. You can choose to install a protein foam fire extinguisher for fire fighting and rescue, or you can choose to put the loaded protein foam fire extinguisher into use, and you can also add water film foam fire extinguishers that are often seen in real life. A variety of balanced foam fire extinguishing devices allow professional users to freely configure according to their own needs and the specific conditions of the site. 3. Stable performance and high reliability Foam fire extinguishing device adopts atmospheric pressure stainless steel foam liquid storage tank, which is safe and sturdy and can carry out fire fighting work for a long time. The built-in stainless steel foam liquid gear pump supplies foam liquid, so that the working pressure and flow rate of the foam mixed liquid have a large adaptation range, and it will not rust due to the corrosion of the foam liquid. Its backflow guarantees that the rated working pressure set by the device is very stable. This makes the stable and safe balanced foam fire extinguishing device recognized and loved by the industry. Driven by the rapid economic growth, grassroots construction is booming and stable. The balanced foam fire extinguishing device in the field of fire protection industry has been used more and more widely. The balanced foam fire extinguishing device relies on the scientific and reasonable foam ratio, stable performance, high reliability, and wide compatibility and other advantages. development of.
      • 消防炮为什么广受业内认可
        Fire-fighting water cannons are mainly composed of water inlet pipe, slewing body, water collecting pipe, and jet adjustment ring. By increasing the internal water pressure, they become the best equipment for remote fire suppression. In recent years, high-quality fire monitors have been put into use in the field of fire disaster mitigation, and they have also been recognized by various fields including fire teams. So why are fire monitors so recognized in the industry? First, there is a high degree of flexibility. The overall size of the fire cannon is relatively light. When it is installed in a fire truck, it can be used for horizontal rotation and pitch rotation. It can easily adjust the angle and distance of the spray. To very good effect. And because these fire cannons are small in weight and small in size, fire fighting vehicles can be equipped with multiple at one time, which is very helpful in suppressing the spread of fire. Second, it is suitable for many types of fire fighting. Fire cannons are divided into two types: fire water cannons and fire foam cannons. As the name implies, fire water cannons use jet water to play a role in extinguishing fires. Fire cannons spray air foam and are mainly used in some areas that are not suitable for water fire fighting, such as fires caused by some chemical products. Third, the scope of application is wide. In terms of the use and use of fire monitors, not only fire fighting vehicles can be equipped with fire monitors, but some large enterprises can also be equipped with some reliable fire monitors for prevention and emergency. These areas include, but are not limited to, places such as petrochemical companies, storage tank areas, aircraft hangars, warehouses, ports and docks. It can be said that fire cannons can play a very wide range of uses. Therefore, in general, fire cannons can not only be used as important equipment for fire rescue and disaster relief, but also one of the essential items for prevention and emergency rescue in various industries. It is precisely for this purpose that various types of high-quality fire monitors can also be recognized for their excellent flexibility and applicability, and become the first choice for fire suppression and disaster reduction in various industries.
      >
      xiniuyun.com 售后服务 After sales service xiniuyun.com

      Focus on the design and manufacturing of global direct-operated mechanical engineering equipment

      The group's headquarters and its subsidiary subsidiaries now have about 10,000 employees, including more than 500 R & D personnel in national-level enterprise technology centers. In 2009, the main business revenue exceeded 11 billion yuan, and the sales volume of various types of construction machinery exceeded 40,000 units. The sales revenue, profitability, labor efficiency, and market share of loaders have been among the top in the industry for many years.

        Tell me your needs and submit your content. We will contact you as soon as possible!

        Address: Hankou City Square, Houhu, Jiang'an District, Wuhan
        Copyright © 2005-2013 Wuhan Xinaolong Fire Fighting Equipment Co., Ltd.
        Rhino Cloud provides enterprise cloud services
        X
        1

        QQ settings

          3

          SKYPE settings

            4

            Ali Wangwang Settings

              5

              Phone number management

                6

                QR code management

                  Expand
                  Go to mobile site
                  白小姐中特网必选一肖 白小姐四肖必选一肖 黄大仙精选资料网站 白小姐精选四不像大全 精选10码期期准 三肖精选10码